Foss - Hydrotec™ 8000

Back to product overview

Call us +856 21 221 023

Contact us
Downloads

LAOS

Julien Moret, General Manager, Laos, Myanmar & Cambodia

Phone +856 21 221 023

Fax +856 21 453 555

Contact Email

DKSH Laos Company Ltd.
3rd Floor, Vientiane Center Office Building Khouvieng Road, Sisattanak District
Vientiane Capital
Laos

Hydrotec™ 8000 Brochure - Foss - Protected
(PDF, 347 KB)

Hydrotec™ 8000

Fully automated acid hydrolysis system. Patented HydroCap™ – single use filter system. Reduced foot print and batch handling of 12 samples.

The HydrotecTM 8000 total fat solution, consisting of an extraction unit, a hydrolysis unit and a FOSS Hydrocap single filter system, allows you to perform total fat analysis in one integrated procedure.

Unique patented filter system

The unique, patented HydrocapTM filter avoids sample transfer and reduces the risk of human error. Laboratory costs are dramatically reduced and higher sample throughput improves cost effectiveness.

Improving throughput at a lower cost

Simplified operation reduces the potential for human error in total fat analysis while reducing costs and improving overall sample throughput.

Reducing risk in total fat analysis

Chemicals are added and removed by pump, improving safety and reducing the risk of error. For total fat analysis, Hydrotec 8000 can be used together with a Soxtec 8000 or ST255 Soxtec extraction unit and FOSS HydroCap single filter that works across both units.

Technical Specifications

W x D x H (mm)	430 x 340 x 310 (Height with lid open is 600)
Weight	18 kg
Power rating	1860 W (230 VAC version) 1660 W (120 VAC version)
Internal fuses (CU)	F10A250V (230 VAC version) F15A125V (120 VAC version)
Sample size	0.5-2 g
Measurement range	0.1-100% fat in combination with extraction
Repeatability	Typically ±1% relative standard deviation for 10-100% fat content in combination with extraction
Capacity per batch	12 samples simultaneously
Hydrolysis time	Typically 2 hours, or as stated in Application
Modes	2 modes; Automatic/Manual
Programs	1-9
Voltage	100-120 VAC 50/60Hz or 220-240 VAC 50/60Hz depending on ordered version
Water supply	Two water taps - for cooling and also for rinsing water. Alternatively one tap equipped with a T-connector. Deionized or distilled water is not needed.
Cooling and rinsing water	Water tap: 1 litre/min, <25 °C (pressure 50 to 500 kPa or 0.5 to 5 bar). Circulating Water Cooler: 1 litre/min, <25 °C (max backpressure 20 kPa or 0.2 bar)
Drain	One drain/sink for rinse, acid and cooling water
Ventilation	Fume hood
Use	Indoor
Altitude	Up to 2000 m
Temperature	5-40 °C
Relative humidity	Maximum 80%
Pollution degree	2
Protection class	IP41

Highlights

Acid hydrolysis

In some cases, the fat is chemically or mechanically bound to e.g. carbohydrates, salts or proteins. Acid hydrolysis breaks these bonds – making it possible to extract the fat.

Innovative system

Chemicals are added and removed by pump, improving safety and reducing the risk of human error
Water rinse is performed automatically
The system is closed and releases no fumes

Simplified process

This unique patented Hydrocap™ filter contains the sample from the initial weighing, through hydrolysis to final extraction; avoiding sample transfer errors. It is a fully automated system that performs automated acid hydrolysis and Randall improved Soxhlet extraction in one integrated process.

Batch handling tools

Batch handling, with no sample transfer, is used throughout the procedure. Boiling, rinsing and filtration are performed under reproducible and controlled conditions. The system offers substantial savings in terms of operator time, as well as improved analytical precision compared to manual methods.

How to Do Total Fat Analysis with The Soxtec 8000 System

FOSS creates end-to-end solutions that secure and improve food quality. From raw material to finished product. Our analysis instruments refine measurements into information management that enables businesses to run intelligent data-driven productions with less waste and bigger yields. Controlling cost and quality across all sectors and value chains, we help food and agricultural producers limit the number of human errors, scale their business faster and reduce manual labor as well as labor costs. We call it analytics beyond measure.

We cover these food and agricultural industries: Dairy, Feed and Forage, Grain, Flour Milling & Oilseed Processing, Laboratories, Meat, Raw Milk Testing and Wine.

Over the last 60 years, we have made it our business to define the standard of analytical solutions for the food and agricultural industry. We pioneered advanced analysis for the challenging production environments in the 1960’s, and we were the first to integrate chemical composition analysis in process lines. Now our resolve and ambition have also made us the international benchmark in the field of chemometrics and real time analytics.