Vertiv - Thermal management - In-Row Cooling

The Vertiv Liebert CRV system offers highly flexible, in-row cooling for data centers requiring higher density cooling with greater efficiency and capacity.

Best suited for:

Banking, financial and insurance Data center/colocation/hosting education government healthcare retail and wholesale.

The Liebert CRV is a precision data center cooling solution providing temperature and humidity control.

It integrates within a row of data center racks, providing cooling close to the heat load. The Liebert CRV is often used with aisle containment and the advanced Liebert iCOM-S thermal supervisory control to independently manage airflow and temperature, greatly improving efficiency and supporting higher rack densities. Adjustable airflow baffles allow you to more precisely direct airflow within the row. Liebert CRV uses environmentally-friendly R410A refrigerant. The system is available in two widths, 300mm and 600mm, and multiple capacities. It is available in systems for air, water/glycol, and chilled water cooling.

Benefits:

• Allows more space for revenue generating I.T. equipment by minimizing UPS footprint
• Maximizes active power at unity power factor
• Reduces operating expenses
• Installation flexibility
• Reduces total cost of ownership
• Zero impact on upstream infrastructure
• Compatible with modern mission critical loads
• Delivers proactive remote services

Features:

• Smallest footprint among all competitors at this kVA size
• Three modes of operating efficiency, Double Conversion (97%), Dynamic Online (98%) and ECO Mode (99%)
• Advanced touchscreen control panel
• Lithium ion battery compatible
• Up to 8 units can be paralleled 
• Intelligent paralleling options
• High Impedance DC Ground Fault detection for 2014 NEC compliance
• Dual asynchronous source / dual input capable

Warranty:

One year limited Warranty against defects in material and workmanship.

The indoor Liebert XD Pumping and Chiller Units include the Liebert XDP and the Liebert XDC units. These refrigerant-based systems support Liebert XD System spot/zone data center cooling modules, including the Liebert XDO, Liebert XDV, Liebert XDH, and Liebert XD CoolFrame units. The Liebert XDP is used between the cooling units and an associated heat rejection system, while the Liebert XDC is used between the cooling units and a chilled water system.

Best suited for:
Banking, financial and insurance data center/colocation/hosting education government healthcare retail and wholesale.

Benefits:

• Highly efficient
• Fast and easy installation
• Highly scalable
• Self-optimizing protection routines

Features:

• Cools more than 30kW per rack.
• Supports Liebert XD Smart Modules.
• 60 Hz and 50 Hz models.
• Energy efficient redundant pumps
• Uses advanced Liebert iCOM unit controls

Warranty:
One year limited Warranty against defects in material and workmanship.

Manage and control your entire data center cooling system for up to 50% higher efficiency, improved protection and greater productivity. Liebert iCOM-S provides a single point for managing your entire cooling infrastructure and gaining quick access to actionable data, system diagnostics and trending.

Best suited for:
Banking, financial and insurance data center/colocation/hosting education government healthcare retail and wholesale.

Benefits:

• Up to 50% system efficiency gains
• 30% lower deployment costs
• Improved thermal efficiency, capacity and protection through visibility into thermal system performance
• Increased thermal system responsiveness to changes in facility and IT demand
• Optimized thermal system performance to reduce cooling unit wear and tear
• Simple and easy to deploy 
• Cuts sensor deployment times in half

Features:

• Single point for accessing data from all sensors and cooling units
• Teamwork modes to harmonize the operation of multiple cooling units
• Pre-configured to quickly deploy with existing Liebert brand cooling uints
• Auto-configuration detects and configures up to 4,800 sensors, without custom integration to building management systems
• Multiple zone support for configuration of different types of cooling spaces within the data
• Large format touchscreen

Warranty:

One year limited warranty against defects in material and workmanship.

The Liebert HPC-S provides chiller support for small to mid-sized computer rooms, with cooling capacities of 192kW (55 tons), 285kW (81 tons) and 362kW (103 tons).

Best suited for:
Banking, financial and insurance data center/colocation/hosting education government healthcare retail and wholesale.

Benefits:

• Up to 40% annual energy savings over traditional systems
• Annual mechanical PUE <1.2
• Operates year-round
• Maximizes free cooling hours

Features:

• Operates with Liebert CRV In-Row Cooling System
• Leverages lower ambient temperatures and higher operating temperatures
• Uses a reecooling economizer

Warranty:
One year limited Warranty against defects in material and workmanship.

Hot aisle/cold aisle configuration separates hot and cold air streams to improve data center infrastructure efficiency. A physical barrier - containment - optimizes this configuration for better cooling operation and higher efficiency.

Aisle Containment Systems from Vertiv optimize the efficiency, design and operation of your data center infrastructure. Row-based containment solutions support both standard and non-uniform hot/cold aisle applications.

Benefits:

• Flexibility configurations to fit uniform and non-uniform aisles.
• Retrofit to existing aisle configurations.
• Variable standard components are interchangeable to create custom solutions.
• Optimize cooling efficiency by up to 30% Increase space efficiency and availability capacity.
• Easy to retrofit to existing hot/cold aisle configuration.
• Suitable for raised or non-raised floors.

Features:

• Lowest total cost of wwnership increase of 30+% cooling efficiency utilize existing cooling system.
• Payback within a few months to less than two years low initial investment.
• Compatible with Vertiv racks, and racks by other manufacturers.
• Variable standard components interchangeable to create custom solutions.
• 25+% increase in available cooling capacity by implementing aisle containment.
• Interoperable with SmartAisle solutions for greater infrastructure visibility. 

Warranty:
This Vertiv product is warranted to be free of defects in material and workmanship for a period of two (2) years from the date of product shipment. If any part or portion of the Vertiv product fails to conform to this Warranty within the Warranty period, Vertiv, at its option, will furnish new or factory remanufactured components for replacement of that part or portion, or Vertiv may furnish User with a replacement product. Vertiv will not assume labor or shipping charges to replace the Vertiv product or any part or portion thereof.

The Liebert MC Microchannel Condenser is an outdoor air-cooled condenser that provides higher efficiency, while using less refrigerant. Features such as variable speed fans, advanced controls and a microchannel coil make this system uniquely innovative.

Best suited for:
Education data center/colocation/hosting banking, financial and insurance government healthcare retail and wholesale.

Benefits:

• Operates with higher efficiency than fin and tube condensers, with an annual savings of up to 85%
• Improves unit and system efficiency at full and partial loads
• Reduces refrigerant volumes and decreases refrigerant charge levels in matched condensers, by more than 50% on condensers without flooded receiver systems and more than - 20% on condensers equipped with flooded receiver systems
• 20-50% lighter installed weight

Features:

• Extremely efficient micro-channel coils
• Variable-speed EC fans
• Compatible with R-410A, R-407C and R-22 refrigerants
• Multiple voltage and refrigerant configurations available to match heat removal needs 

Warranty:
One year limited Warranty against defects in material and workmanship.

Liebert XD refrigerant-based cooling modules deliver high-density cooling with highly flexible configurations for floor-mount, rack-mount and ceiling-mount applications.

Best suited for:
Education data center/colocation/hosting banking, financial and insurance government healthcare retail and wholesale.

Benefits:

• Highly efficient
• Require little or no floorspace   
• Cools more than 30 kW per rack
• Requires little or no floor space.
• Highly scalable expansion without interrupting cooling operations 

Features:

• High heat-density cooling modules
• Mount above, between or on racks
• Use pumped refrigerant technology
• Available in nominal capacities of 160kW (46 tons) for 60 hz applications and 130kW (37 tons) for 50 hz applications 

Warranty:
One year limited Warranty against defects in material and workmanship.

The Liebert DCW cooling system includes the Liebert DCD fanless chilled water door and the Liebert DCP Coolant Pumping Unit to supply chilled water to high density racks. The modules offer an alternative heat removal solution to critical applications where the hot aisle/cold aisle approach to cooling is not practical.

Best suited for:
Education data center/colocation/hosting banking, financial and insurance government healthcare retail and wholesale.

Benefits:

• Uses no white space
• Optimizes energy efficiency
• Leverages existing building chilled water loop
• Ideal where hot aisle/cold aisle is not practical 

Features:

• Includes the Liebert DCD fanless chilled water door and Liebert DCP Coolant Pumping Unit
• 60 Hz and 50 Hz models.
• Water-based high heat density systems
• Full enclosure system, or back-of-rack-installed module 

Warranty:
One year limited Warranty against defects in material and workmanship.

Coolant chiller unit available in an air cooled configuration with remote condenser. In conjunction with the Liebert XD Cooling Modules, the Liebert XDC system can cool more than 30kW per rack.

Best suited for:
Education data center/colocation/hosting banking, financial and insurance government healthcare retail and wholesale.

Benefits:

• Energy efficient
• Efficient use of floor space efficient
• Highly scalable
• Easy to install

Features:

• Available in nominal capacities of 160kW (46 Tons) and 130kW (37 Tons) for 50Hz applications.
• Cools more than 500W/sq. ft.
• Includes enclosure, pumps, heat exchanger, receiver tank, controls, valves and piping in a packaged unit
• Uses pumped refrigerant

Warranty:
One year limited Warranty against defects in material and workmanship.