Need support?

Please leave a message

×

NEW! Eltra - Oxygen/Nitrogen Analyzer - Elementrac ON‑p 2

Oliver Hammel

Vice Preseident

+66 2 639 7000
Contact Email
บริษัท ดีเคเอสเอช เทคโนโลยี จำกัด
2533 ถนนสุขุมวิท
แขวงบางจาก เขตพระโขนง 10260 กรุงเทพฯ
ประเทศไทย
  • Elementrac ONHp-2 Brochure - Eltra - Protected
    (PDF, 538 KB)

Product advantages:

  • Simultaneous nitrogen and oxygen determination with inert gas fusion technique
  • Powerful 8,5 kW* impulse furnace for temperatures in excess of 3,000 °C
  • Gas flow system with electronic gas flow control and new leakage test

The new ELEMENTRAC ON-p 2 is a powerful and robust elemental analyzer for measurement of oxygen and nitrogen concentrations in inorganic materials like steel, iron, copper or ceramics. The highly sensitive NDIR and thermal conductivity detectors reliably detect element concentrations from low ppm content to high percentages.

The innovative sample port system with pulsed chamber rinsing and vertical sample drop allow for user-friendly and comfortable analysis of rod-shaped, granular or powdery samples with a weight of up to 2 grams.

Typical sample materials : alloys, aluminum, ashes, carbides, cast iron, ceramics, copper, ferroalloys, iron, metals, ores, refractory metals, silicon, steel

Technical Specifications

Measured elements nitrogen, oxygen
Samples inorganic
Furnace alignment vertical
Sample carrier graphite crucibles
Field of application ceramics, engineering / electronics, steel / metallurgy
Furnace electrode impulse furnace (max. 8,5 KW*), temperatures in excess of 3,000 °C
Detection method solid state infrared absorption for oxygen thermal conductivity for nitrogen
Typical analysis time 120 - 180 s
Chemicals required copper oxide, magnesium perchlorate, sodium hydroxide
Gas required compressed air, helium 99.995 % pure, argon 99.995% pure (if required), all gases with (2 - 4 bar / 30 - 60 psi)
Power requirements 3~ 400 V, 50/60 Hz, max. 8,500 W
Dimensions (W x H x D) 57 x 77 x 63 cm
Weight ~ 161 kg
Required equipment PC, monitor, balance (resolution 0.0001g)
Optional accessories carrier gas purification, external chiller, gas calibration unit

* limited to 6.8 kw in application settings

Key Features

  • Low gas consumption and high sensitivity due to closed gas system
  • Easy application of pins, powders and granules
  • Inexpensive argon as carrier gas possible
  • Short analysis time
  • Powerful impulse furnace with 8.5 kW
  • Optional Autocleaner
  • Reliable ON elemental analysis of inorganic samples like steel, non-ferrous metals, ceramics, slags, ores, etc.

Operation and Analysis Process

Step 1: Logging the sample into the ELEMENTS software

The sample ID is logged into the software and the weight is automatically transferred (see step 2).

Step 2: Weighing and introduction of sample into the port

The ELEMENTRAC ON-p 2 analyzes volumes from a few mg up to 2 grams safely and precisely. Rod-shaped or granular samples can be applied directly. For the elemental analysis of powders, a capsule is recommended which does not have to be sealed.

Step 3: Analysis

The empty graphite crucible is then placed on the lower electrode and the elemental analysis is started via the ELEMENTS software. The software controls all subsequent process steps.

Step 4: Data output and export

120 to 180 seconds after the analysis has started, the measured concentrations are available for export as a report or via LIMS.

Oxygen, Nitrogen and Hydrogen Analyser ONH-p 2 Introduction

  • การก่อสร้าง
  • เครื่องจักรและการผลิต
  • เหมืองแร่และแร่ธาตุ
Eltra

ELTRA is a specialist for elemental analyzers for the accurate and rapid analysis of solid materials. ELTRA equipment is a standard for elemental analysis in industries such as mining, steel, energy, cement and metal working.

ELTRA analyzers are used to reliably determine elements like carbon, hydrogen, sulfur, oxygen and nitrogen, and cover a wide, dynamic measuring range. The ability to adapt each analyzer to user specifications allows the precise measurement of a great variety of organic and inorganic samples in a multitude of applications.

ผลิตภัณฑ์ที่คล้ายคลึงกัน

Eltra - Carbon/Hydrogen/Sulfur Analyzer - CHS-580

Eltra - Carbon/Hydrogen/Sulfur Analyzer - CHS-580

Eltra - Carbon/Sulfur Analyzer - CS-580

Eltra - Carbon/Sulfur Analyzer - CS-580

Eltra - Carbon/Sulfur Analyzer - ELEMENTRAC CS-i

Eltra - Carbon/Sulfur Analyzer - ELEMENTRAC CS-i

Eltra - Hydrogen Analyzer - H-500

Eltra - Hydrogen Analyzer - H-500

Eltra - Thermogravimetric Analyzer - TGA Thermostep

Eltra - Thermogravimetric Analyzer - TGA Thermostep

Malvern - MicroCal Range สำหรับการวิเคราะห์ความเสถียรและปฏิกิริยาของสารชีวโมเลกุล

Malvern - MicroCal Range สำหรับการวิเคราะห์ความเสถียรและปฏิกิริยาของสารชีวโมเลกุล

NEW! Eltra - Oxygen/Hydrogen Analyzer - Elementrac OH-p 2

NEW! Eltra - Oxygen/Hydrogen Analyzer - Elementrac OH-p 2

NEW! Eltra - Oxygen/Nitrogen/Hydrogen Analyzer - Elementrac ONH‑p 2

NEW! Eltra - Oxygen/Nitrogen/Hydrogen Analyzer - Elementrac ONH‑p 2

Nittoseiko Analytech NSX-2100 – เครื่องวิเคราะห์หาปริมาณคลอรีน / ซัลเฟอร์/ ไนโตรเจน

Nittoseiko Analytech NSX-2100 – เครื่องวิเคราะห์หาปริมาณคลอรีน / ซัลเฟอร์/ ไนโตรเจน

[]

Select a market