Need support?

Please leave a message

NEW! Eltra - Oxygen/Nitrogen Analyzer - Elementrac ON‑p 2

Back to product overview

CAMBODIA

Len Sena, Business Development Manager

Phone +855 87 887 883

Contact Email

DKSH (Cambodia) Ltd
Corner Preah Monivong Boulevard and Street 484
Phnom Penh
Cambodia

INDONESIA

Noor Emma Sophianie, General Manager

Phone +62 21 2988 8557

Contact Email

PT DKSH Indonesia
12930 Jakarta Selatan
Indonesia

LAOS

Julien Moret, General Manager, Laos, Myanmar & Cambodia

Phone +856 21 221 023

Fax +856 21 453 555

Contact Email

DKSH Laos Company Ltd.
3rd Floor, Vientiane Center Office Building Khouvieng Road, Sisattanak District
Vientiane Capital
Laos

MYANMAR

Dr. Paing Soe Aung, Assistant General Manager

Phone +951 8565270

Contact Email

DKSH (Myanmar) Ltd.
Thitsar Road, Yankin Township
Yangon
Myanmar

THAILAND

Oliver Hammel, Vice President

Phone +66 2 639 7000

Contact Email

DKSH Technology Limited (Head Office)
2533 Sukhumvit Road, Bangchak, Phrakhanong
10260 Bangkok
Thailand

Product advantages:

Simultaneous nitrogen and oxygen determination with inert gas fusion technique
Powerful 8,5 kW* impulse furnace for temperatures in excess of 3,000 °C
Gas flow system with electronic gas flow control and new leakage test

The new ELEMENTRAC ON-p 2 is a powerful and robust elemental analyzer for measurement of oxygen and nitrogen concentrations in inorganic materials like steel, iron, copper or ceramics. The highly sensitive NDIR and thermal conductivity detectors reliably detect element concentrations from low ppm content to high percentages.

The innovative sample port system with pulsed chamber rinsing and vertical sample drop allow for user-friendly and comfortable analysis of rod-shaped, granular or powdery samples with a weight of up to 2 grams.

Typical sample materials : alloys, aluminum, ashes, carbides, cast iron, ceramics, copper, ferroalloys, iron, metals, ores, refractory metals, silicon, steel

Technical Specifications

Measured elements	nitrogen, oxygen
Samples	inorganic
Furnace alignment	vertical
Sample carrier	graphite crucibles
Field of application	ceramics, engineering / electronics, steel / metallurgy
Furnace	electrode impulse furnace (max. 8,5 KW*), temperatures in excess of 3,000 °C
Detection method	solid state infrared absorption for oxygen thermal conductivity for nitrogen
Typical analysis time	120 - 180 s
Chemicals required	copper oxide, magnesium perchlorate, sodium hydroxide
Gas required	compressed air, helium 99.995 % pure, argon 99.995% pure (if required), all gases with (2 - 4 bar / 30 - 60 psi)
Power requirements	3~ 400 V, 50/60 Hz, max. 8,500 W
Dimensions (W x H x D)	57 x 77 x 63 cm
Weight	~ 161 kg
Required equipment	PC, monitor, balance (resolution 0.0001g)
Optional accessories	carrier gas purification, external chiller, gas calibration unit
	* limited to 6.8 kw in application settings

Key Features

Elementrac ONH-p

Low gas consumption and high sensitivity due to closed gas system
Easy application of pins, powders and granules
Inexpensive argon as carrier gas possible
Short analysis time
Powerful impulse furnace with 8.5 kW
Optional Autocleaner
Reliable ON elemental analysis of inorganic samples like steel, non-ferrous metals, ceramics, slags, ores, etc.

Operation and Analysis Process

Step 1: Logging the sample into the ELEMENTS software

The sample ID is logged into the software and the weight is automatically transferred (see step 2).

Step 2: Weighing and introduction of sample into the port

The ELEMENTRAC ON-p 2 analyzes volumes from a few mg up to 2 grams safely and precisely. Rod-shaped or granular samples can be applied directly. For the elemental analysis of powders, a capsule is recommended which does not have to be sealed.

Step 3: Analysis

The empty graphite crucible is then placed on the lower electrode and the elemental analysis is started via the ELEMENTS software. The software controls all subsequent process steps.

Step 4: Data output and export

120 to 180 seconds after the analysis has started, the measured concentrations are available for export as a report or via LIMS.

Oxygen, Nitrogen and Hydrogen Analyser ONH-p 2 Introduction

Key Industries

Construction
Machinery & Manufacturing
Mining & Minerals

ELTRA is a specialist for elemental analyzers for the accurate and rapid analysis of solid materials. ELTRA equipment is a standard for elemental analysis in industries such as mining, steel, energy, cement and metal working.

ELTRA analyzers are used to reliably determine elements like carbon, hydrogen, sulfur, oxygen and nitrogen, and cover a wide, dynamic measuring range. The ability to adapt each analyzer to user specifications allows the precise measurement of a great variety of organic and inorganic samples in a multitude of applications.