Need support?

Please leave a message

×

Product advantages

  • Hydrogen determination with heat extraction technique for determination of residual hydrogen
  • High-capacity thermal conductivity cell
  • Easy calibration with standards or gas dosing

The new ELEMENTRAC OH-p 2 is a powerful and robust elemental analyzer for measurement of oxygen and hydrogen concentrations in inorganic samples like steel, iron, copper or ceramics. The highly sensitive NDIR and thermal conductivity detectors reliably detect element concentrations from low ppm content to high percentages.

The ELEMENTRAC OH-p 2 elemental analyzer meets or exceeds the requirements of all relevant international standards such as ASTM E 1019 or DIN EN 3976.

Typical sample materials : alloys, aluminum, ashes, carbides, cast iron, copper, ferroalloys, iron, metals, ores, refractory metals, silicon, steel

Technical Specifications

Measured elements hydrogen, oxygen
Samples inorganic
Furnace alignment vertical
Sample carrier graphite crucibles
Field of application ceramics, engineering / electronics, steel / metallurgy
Furnace electrode impulse furnace (max. 8,5 KW*), temperatures in excess of 3,000 °C
Detection method solid state infrared absorption for oxygen, thermal conductivity for hydrogen
Typical analysis time 120 - 180 s
Chemicals required Schuetze reagents, magnesium perchlorate, sodium hydroxide
Gas required compressed air, nitrogen 99.995 % pure, all gases with (2 - 4 bar / 30 - 60 psi)
Power requirements 3~ 400 V, 50/60 Hz, max. 8,500 W
Dimensions (W x H x D) 56 x 78 x 64 cm
Weight ~ 165 kg
Required equipment PC, monitor, balance (resolution 0.0001g)
Optional accessories carrier gas purification, external chiller, gas calibration unit

*Limited to 6.8 kw in application settings

Key Features

  • Low gas consumption and high sensitivity due to closed gas system
  • Easy application of pins, powders and granules
  • Inexpensive argon as carrier gas possible
  • Short analysis time
  • Powerful impulse furnace with 8.5 kW
  • Optional Autocleaner
  • Reliable OH elemental analysis of inorganic materials like steel, non-ferrous metals, ceramics, slags, ores, etc

Operation and Analysis Process

Step 1: Logging the sample into the ELEMENTS software

The sample ID is logged into the software and the weight is automatically transferred (see step 2).

Step 2: Weighing and introduction of sample into the port

The ELEMENTRAC OH-p 2 analyzes volumes from a few mg up to 2 grams safely and precisely. Rod-shaped or granular samples can be applied directly. For the elemental analysis of powders, a capsule is recommended which does not have to be sealed.

Step 3: Analysis

The empty graphite crucible is then placed on the lower electrode and the elemental analysis is started via the ELEMENTS software. The software controls all subsequent process steps.

Step 4: Data output and export

120 to 180 seconds after the analysis has started, the measured concentrations are available for export as a report or via LIMS.

Oxygen, Nitrogen and Hydrogen Analyser ONH-p 2 Introduction

  • การก่อสร้าง
  • เครื่องจักรและการผลิต
  • เหมืองแร่และแร่ธาตุ
Eltra

ELTRA is a specialist for elemental analyzers for the accurate and rapid analysis of solid materials. ELTRA equipment is a standard for elemental analysis in industries such as mining, steel, energy, cement and metal working.

ELTRA analyzers are used to reliably determine elements like carbon, hydrogen, sulfur, oxygen and nitrogen, and cover a wide, dynamic measuring range. The ability to adapt each analyzer to user specifications allows the precise measurement of a great variety of organic and inorganic samples in a multitude of applications.

[]