Hobart - Warewashing - Utensil Washer

Available models

Technical specifications
Cycle times in sec. [1]	90 / 180 / 360 and special cycles
Water consumption	2.0 l/rack
Tank capacity	10.6 l
Tank heating	0.8 kW
Wash pump	0.6 kW / 350 l/min
Rack size	500 x 500 mm
Loading height	425 mm
Noise level	60.5 dB (A)
Weight (gross / net)	70 / 60 kg
Max. supply water temperature	60°C
Required flow rate	5 l/min
Power cord	2,000 mm

VISIOTRONIC Intelligent Control: ensures a simple and intuitive operating with a single button. When the display is activated by a proximity sensor, all the necessary information appears in the large display, in clear text or in the form of symbols
Intelligent wash water control: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result. This reduces the amount of fresh water used per rinse cycle up to 2.0 l
Double rack system: two racks can be washed in a single wash cycle. One rack of cups can be washed underneath, while a second rack containing dishes and cutlery can also be washed above it. Thanks to the optimum use of the entire wash chamber the performance of the machine can be doubled
CLIP-IN Wash and Rinse Arms both the wash and rinse arms can be lifted out of the wash chamber and replaced with one hand and without any tools
Intelligent data documentation: automatic recording of important operational data and consumptions and indication on the display

Significantly less manual pre-cleaning and second runs by intensive wash cycles withsteam injection and direct injection of detergent
Extra capacity by side wash system: e.g. up to 6 GN-trays 1/1, 4 EN2 container
Double walled housing for low noise level and energy efficiency
Strainer Control PROOF: prevents operation without tank strainer
Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
The optional exhaust heat recovery with integrated Door System VAPOSTOP uses steam to heat fresh feed water and reduces the amount of power needed to reach the final rinse temperature, saving up to 1.5 kW/h.
Door System VAPOSTOP prevents vapour to escape from machine when door is opened

Significantly less manual pre-cleaning and second runs by intensive wash cycles with steam injection and direct injection of detergent
Extra capacity by side wash system: e.g. up to 8 GN-trays 1/1, 5 EN2 container
Double walled housing for low noise level and energy efficiency
Strainer Control PROOF: prevents operation without tank strainer
Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
The optional exhaust heat recovery with integrated Door System VAPOSTOP uses steam to heat fresh feed water and reduces the amount of power needed to reach the final rinse temperature, saving up to 5.2 kW/h.
Door System VAPOSTOP prevents vapour to escape from machine when door is opened

Washing POWER-PLUS: high pressure washing to wash heavily soiled wash items
Strainer Control PROOF: prevents operation without tank strainer
Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
Loading height L: above-average loading height of 860 mm
Machine height 2-in-1: machine height can be reduced by up to 200 mm with the door open - for use in spaced with low ceilings
The optional waste water heat recovery system transfers heat from hot waste water to the fresh-water supply, reducing boiler power consumption and saving up to 5.2 kW/h.

Washing POWER-PLUS: high pressure washing to wash heavily soiled wash items
Strainer Control PROOF: prevents operation without tank strainer
Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
Loading height L: above-average loading height of 865 mm
Machine height 2-in-1: machine height can be reduced by up to 200 mm with the door open - for use in spaces with low ceilings
The optional waste water heat recovery system transfers heat from hot waste water to the fresh-water supply, reducing boiler power consumption and saving up to 8.6 kW/h.
The optional exhaust heat recovery including an integrated Door System VAPOSTOP uses steam to heat fresh feed water and reduces the amount of power needed to reach the final rinse temperature by up to 3.5 kW/h

Washing POWER-PLUS: high pressure washing to wash heavily soiled wash items
Strainer Control PROOF: prevents operation without tank strainer
Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
The optional waste water heat recovery system transfers heat from hot waste water to the fresh-water supply, reducing boiler power consumption and saving up to 8.6 kW/h.
Single-button Control SMARTRONIC: colour-coded status indication and remaining time indicator
Refill signal for machines with external chemical container

Washing POWER-PLUS: high pressure washing to wash heavily soiled wash items
Strainer Control PROOF: prevents operation without tank strainer
Wash System ROTOR-X: separate rotating upper and lower 4 spoke wash arms deliver dynamic wash power
Loading height L: above-average loading height of 880 mm (with rack 850 mm)
The optional drain heat recovery system transfers heat from hot waste water to the fresh-water supply, reducing boiler power consumption and saving up to 8.6 kW/h
Single-button Control SMARTRONIC: colour-coded status indication and remaining time indicator
Refill signal for machines with external chemical container
HYGIENE Machine Care Programme and Chemical Tablets INTENSIVE: remove calcium carbonate and other deposits from tank wall