Datacolor - Lab Dye Machines

Available models

Technical specifications
Fibers types	All
Substrate types	All
Multiple beaker size configuration	Yes
Wash-fastness simulation	Yes
Minimum liquor ratio	1:5 Natural – 1:4 Synthetic
Display temperature in C° or F	Yes
Temperature range	20° – 140°C
Infrared lamp	3KW
Heating gradient	+5.0ºC/min
Beaker-to-beaker accuracy	±0.5ºC
Heating accuracy: isotherm	±2.0ºC
Cooling system	Air
Speed	5-50 selectable
Reverse rotation	Yes-automatic
Manual dosing (injection or membrane)°	Yes
Quickdose	Yes
Controller type	Microprocessor control
Calibrated temperature accuracy	<1ºC
Dyeing temperature control accuracy	<±2ºC
Display color	Monochrome
Program storage	99 programs

Ahiba IR – state-of-the-art, air-cooled infrared dyeing unit. Supports a wide range of dyeing and testing requirements at an affordable price.

The systems should be installed on a sturdy table or benchtop in a laboratory environment with temperature and humidity conditions:

5°-31°C with <80% rH
31°- 40°C with <50% rH
Electrical supply: 230 V, 50/60 Hz Single phase, 3 wire (line, neutral, and earth ground) tolerance of <+/-10%.
Heating power: 3000 W
Total power: 3850 W
If the mains supply is prone to interruptions and failures a UPS is recommended.
The unit is air cooled, ensure at least 12” clearance behind unit for air exhaust

Technical specifications
Fibers types	All
Substrate types	All
Multiple beaker size configuration	Yes
Wash-fastness simulation	Yes
Minimum liquor ratio	1:5 Natural – 1:4 Synthetic
Display temperature in C° or F	Yes
Temperature range	20° – 140°C
Infrared lamp	3KW
Heating gradient	+4.0ºC/min controlled
Beaker-to-beaker accuracy	±0.5ºC
Heating accuracy: isotherm	±1.0ºC
Cooling system	Water/heat exchanger
Speed	5-50 selectable
Reverse rotation	Yes-selectable
Manual dosing (injection or membrane)°	Yes
Quickdose	Yes
Controller type	Microprocessor control
Calibrated temperature accuracy	<1ºC
Dyeing temperature control accuracy	<±1ºC
Touchscreen	Yes
Display color	Color
Program storage	99 programs

Ahiba IR Pro – Outstanding dyeing performance in any textile exhaust dyeing laboratory. Highest attention to accuracy and dyeing flexibility.

The systems should be installed on a sturdy table or benchtop in a laboratory environment with temperature and humidity conditions:

5°-31°C with <80% rH
31°- 40°C with <50% rH
Electrical supply: 230 V, 50/60 Hz Single phase, 3 wire (Line, Neutral, and Earth Ground) tolerance of <+/-10%.
Heating power: 3000 W
Total power: 3850 W
If the mains supply is prone to interruptions and failures a UPS is recommended.
The unit is water cooled, Use only filtered and softened water.
Pressure: 2-3 bar (30-45 psi)
Hardness: <10 dH
Temperature: Ideally <15°C
Hose: min. diam. 3/8″ (10mm), Hi Temp.