It's a motorized pull force test devices for forces from 100 N (22.5 lbf) up to 10,000 N (2,250 lbf). Capabilities such as multiple force ranges and pulling rates, job memory and networking capabilities vary between models. Wire and terminal holders can be configured or customized to suit specific application
The PullTester 20 is an economical motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections.
Schleuniger’s PullTester 20 is a motorized, benchtop unit designed to measure pull-test forces for a variety of applications. The most common applications are wire crimp and ultrasonic metal welding connections, but the design makes it possible to create custom fixtures for many other applications. Standards, such as IEC and SAE, specify that the device pulls at a consistent rate.
The Schleuniger PullTester 20 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range, which means repeatable and accurate data. Pull-to-break (destructive) tests can be measured in poundforce, Newtons or kiloponds.
The PullTester 25 is a dual-range, motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections on a broader range of wires than single-range pull test devices.
Schleuniger’s PullTester 25 is a dual-range, motorized, bench-top unit designed to measure pull-test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance.
This versatile machine has two measuring ranges, which are individually calibrated enabling use of its 500 N (110 lbf.) scale for small wires, while easily switching to its 1,000 N (220 lbf.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate.
The Schleuniger PullTester 25 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.
Schleuniger's PullTester 26 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 26 is specially suited for quality assurance in a production environment.
Schleuniger’s PullTester 26 is a dual-range, motorized, bench-top unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 26 can also perform non-destructive tests (hold to a specified force).
This versatile machine has two measuring ranges, which are individually calibrated, enabling use of its 500 N (110 lbf.) scale for small wires, while easily switching to its 1,000 N (220 lbf.) scale for larger wires. This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 26 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data.
Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 12-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.
Schleuniger's PullTester 27 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 27 is specially suited for quality assurance in a production environment.
Schleuniger’s PullTester 27 is a dual-range, motorized, bench-top unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. This versatile machine has two versions with two measuring ranges each, which are individually calibrated, enabling use for small or large cables.
This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 27 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The terminal holder can be designed and manufactured based on your application. In addition, a variety of terminal holders are available upon request.
Schleuniger's PullTester 28 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 28 is specially suited for quality assurance in a production environment.
Schleuniger’s PullTester 28 is a dual-range, motorized, bench-top unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 28 can also perform non-destructive tests (hold to a specified force). This versatile machine has two versions with two measuring ranges each, which are individually calibrated, enabling use for small or large cables.
This dual-range capability ensures the highest accuracy for the widest range of applications. Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 28 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The terminal holder can be designed and manufactured based on your application. In addition, a variety of terminal holders are available upon request.
Schleuniger’s PullTester 320 is a motorized device for use with Schleuniger CrimpCenter automatic crimping machines to measure pull test forces of wire terminations. Pull test values are critical parameters for quality control and assurance. This versatile machine has three measuring ranges, which are individually calibrated. Multiple pulling ranges offer a higher accuracy over the entire device range than single-range devices. The standard measuring ranges are 100 N, 200 N and 1,000 N (22.5 lbf., 45 lbf., and 220 lbf.). The PullTester 320 with its triple-range capability ensures the highest accuracy over the widest range of applications.
Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a specific, constant rate. The Schleuniger PullTester 320 offers four selectable pulling rates consistent with the most common specifications. It is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the complete measurement cycle resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. All necessary testing parameters are programmed via the CrimpCenter EASY software and saved with individual jobs for easy recall.
The standard, 12-position terminal holder accommodates a wide variety of terminals to handle most applications. The machine will test pull forces up to 1,000 N (220 lbf.) and is specially suited for quality assurance in a production environment.
The PullTester 325 is a triple-range, motorized benchtop device for measuring pull forces of crimp connections, welded connections or many other possibilities. The triple-range capability gives the PullTester 325 incredible application flexibility to handle a wide variety of testing applications. Furthermore, this unique capability provides greater accuracy on a broader range of wires than single-range pull test devices. The PullTester 325 is specially suited for quality assurance in a production environment.
This versatile machine has two versions depending on required pull rates. Both versions include three measuring ranges, which are individually calibrated. The standard measuring ranges are 200 N, 1,000 N and 2,000 N (45 lbf., 225 lbf., 450 lbf.), however, other variations are available by special order.
Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 325 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 14-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.
The PullTester 326 is a triple-range, motorized benchtop device for measuring pull forces of crimp connections as well as welded connections. The triple-range capability gives the PullTester 326 incredible application flexibility to handle a wide variety of testing applications.
Schleuniger’s PullTester 326 is a triple-range, motorized, benchtop unit designed to measure pull test forces of crimp and ultrasonic weld connections on a wider range of wires than single-range pull test devices. Pull test values are critical parameters for quality control and assurance. The PullTester 326 can also perform non-destructive tests (hold to a specified force). This versatile machine has three measuring ranges, which are individually calibrated. The standard measuring ranges are 200 N, 1,000 N, and 2,000 N (45 lbf., 225 lbf., 450 lbf.), however, other variations are available by special order. This triple-range capability ensures the highest accuracy for the widest range of applications.
Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 326 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range, resulting in repeatable and accurate data. Pull forces can be measured in poundforce, Newtons or kiloponds. The standard 14-position terminal holder accommodates a wide variety of terminals to suit most applications. A variety of terminal holders, however, are available upon request.
Schleuniger is a global technology group headquartered in Thun (CH) and a leading supplier to the wire processing and testing industry. All wire processing and automation competencies are bundled under the brand name Schleuniger Group in four centers of competence in Europe and one operations hub in Asia.
Schleuniger Group offers wire processing solutions such as, wire cutting, wire stripping, wire testing and cable cutting. With its wholly-owned but independently managed company, DiIT AG, headquartered in Krailling near Munich (DE), the Schleuniger Group is also a leading player in the area of digitalization and industrial Internet of Things (IoT).